|
Software
|
|
Compatible with all GoFlight products
|
|
|
|
GoFlight® Module Support Software Version 1.77
(24 October, 2007)
Here it is! The one you've all been waiting for. Our latest module support for all GoFlight products! ~ compatible with FS2000 through FSX.
-- >
Click here to download our module support for all
GoFlight products. (Version 1.77)<--
Here are the supporting files for the Setup executable file.
Autorun file |
GF Dev 98 file |
GF Dev MNT file |
Read me file |
TQ6 Killjoy config file
|
|
|
GoFlight® Module Support Software Version 1.75
(12 July, 2007)
Here it is! Our latest module support for all GoFlight products! ~ compatible with FS2000 through FSX.
-- >Click here to download our module support for all
GoFlight products. (Version 1.75)<--
Here are the supporting files for the Setup executable file.
Autorun file |
GF Dev 98 file |
GF Dev MNT file |
Read me file |
TQ6 Killjoy config file
|
|
|
GoFlight® Module Support Software Version 1.72
(27 Feb. 2007)
Here it is! Our updated module support for all GoFlight products with FS2000 through FSX!
Note: This software is specifically for FSX support.
-- >Click here to download our module support for all
GoFlight products with FSX!<--
Here are the supporting files for the Setup executable file.
Autorun file |
GF Dev 98 file |
GF Dev MNT file |
Read me file |
TQ6 Killjoy config file
|
|
|
GoFlight® Module Support Software Version 1.70
(6 Nov. 2006)
Here it is! Our module support for all GoFlight products with FS2000 through FSX!
-- >Click here to download our module support for all
GoFlight products with FSX!<--
Here are the supporting files for the Setup executable file.
Autorun file |
GF Dev 98 file |
GF Dev MNT file |
Read me file |
TQ6 Killjoy config file
|
| Module Support Software Version 1.68
|
|
GoFlight® Module Support Software Version 1.60
(22 Feb. 2006)
This supports all GoFlight products including the new MCP Pro, and makes both the
GF-MCP and MCP Pro modules compatible with Project Magenta
when used with Microsoft Flight Simulator 2004.
-- >Click here to download our new 1.60 release.<--
|
|
Software for:
|
-- >Click here to download GF Config<--
|
|
Compatible with:
| GF-45 |
| GF-45PM |
| GF-46 |
| GF-166,
RMK-166 |
| GF-P8,
RMK-P8 |
| GF-T8,
RMK-T8 |
| GF-RP48,
RMK-RP48 |
|
GF-LGT, RMK-LGT |
| GF-MCP,
RMK-MCP |
| GF-TQ6,
RMK-TQ6 |
| GF-ATC |
|
GF-RC |
|
GoFlight® Module Support Software
Version 1.54 (4 Aug, 2005)
Latest Release
-- Full installation for all GoFlight®
cockpit simulation hardware; compatible with Microsoft WindowsTM 98/Me/2000/XPTM operating systems.
PLEASE NOTE that this version
supports the following flight simulator programs only:
- Microsoft
Flight Simulator 2004TM
- Microsoft
Flight Simulator 2002TM
-->Click here to download Version 1.54<--
After downloading: Run the self-extracting executable
file, and follow
the instructions given during the self-extract process.
It is not necessary to first uninstall a prior version of GoFlight®
software. Overwriting an already-installed version can be done
without causing any known problems.
The release notes file (README.TXT) contains a complete description
of the fixes and features included in this release.
Version 1.50 (the
prior CD release) can be downloaded by
clicking here.
|
|
Compatible with:
| GF-45 |
| GF-45PM |
GF-166,
RMK-166
(FS2000 only) |
| GF-P8,
RMK-P8 |
| GF-T8,
RMK-T8 |
GF-RP48,RMK-RP48
(FS2000 only) |
GF-MCP,
RMK-MCP
(FS2000 only) |
GF-TQ6,
RMK-TQ6
(as game controller) |
|
GoFlight® Module Support Software,
Version 1.33
(24 March, 2004)
This version is NOT the most recent!
Please use this version only for compatibility with older flight sim
programs including:
- Microsoft
Flight Simulator 98
- Microsoft
Flight Simulator 2000
- Microsoft
Combat Flight Simulator 2
- Terminal
Reality Fly! II
This version also works with
Microsoft Flight Simulator 2002 and 2004, however, some of the
newest GoFlight® products are not supported.
Full installation; compatible with Microsoft WindowsTM 98/Me/2000/XPTM operating systems.
-->
Click here to download
Version 1.33 <--
After downloading: Run the self-extracting executable
file, and follow
the instructions given during the self-extract process.
It is not necessary to first uninstall a prior version of GoFlight
software. Overwriting an already-installed version can be done
without causing any known problems.
The release notes file (README.TXT) contains a complete description
of the fixes and features included in this release. |
|
Compatible with:
| GF-45 |
| GF-45PM |
| GF-P8,
RMK-P8 |
| GF-T8,
RMK-T8 |
|
GF-LGT, RMK-LGT |
|
GF-RP48, RMK-RP48 |
| GF-MCP,
RMK-MCP |
|
GFKeys -- Key Mapper
Application for GoFlight® Hardware
Version 1.04 (18 Feb., 2008)
GFKeys is a
control-to-key translation program for using your GoFlight® modules
with ALL games and simulation programs -- even other types of
software.
If you're a fan of programs such as Falcon 4, IL-2, LOMAC, or any of
the leading racing sims, you'll really appreciate GFKeys. In
fact, ANY software that accepts commands from the keyboard can be
controlled using GFKeys.
Please note that the GF-46, GF-166, GF-TQ6, GF-MCP Pro, and GF-ATC modules
are not supported in this release.
(Full installation; compatible with Microsoft WindowsTM 98/Me/2000/XP OS.)
-->
Click here to download GFKeys
Version 1.04 <--
Includes sample key maps &
MagLabels graphics for many popular games and sims.
After downloading: Extract the setup program and sample
MagLabels and key maps from the ZIP archive. The setup program
is a self-extracting executable
file. Follow
the instructions given during the self-extract process.
It is not necessary to first uninstall a prior version of GFKeys software. Overwriting an already-installed version can be done
without causing any known problems.
The release notes file (README.TXT) contains a complete description
of the features included in this release.
|
|
Compatible with:
|
GF-45 |
|
GF-45PM |
|
GF-46 |
|
GF-166 |
|
GF-P8 |
|
GF-T8 |
|
GF-RP48 |
|
GF-MCP |
|
GF-TQ6 |
|
|
X-Plane Plug-in
Software
Beta Release 2 (22 July, 2004) |
 |
For users of X-Plane
version 7.30 and later, this software package enables you to control hundreds
of cockpit functions in X-Plane aircraft using GoFlight® modules.
All GoFlight® modules are supported in this
Beta 2 release.
Changes from the previous Beta 1 release include:
-
Built-in
configuration interface for function assignment. No need to
exit the sim to change function assignments.
-
Support for the
GF-46 with up to 8 selectable functions
-
Many new cockpit
control functions, including EFIS/ECAM and control of up to 8 jet
engines using two GF-TQ6 units.
This plug-in package includes a comprehensive function reference
manual in PDF format.
-->
Click here to download
X-Plane Plugin Beta 2 <--
After downloading, please carefully read the
included documentation (both the README file and the reference
manual) for instructions on how to install this software into X-Plane and
assign functions to your GoFlight® modules.
|
|
Compatible with:
| GF-45 |
| GF-45PM |
| GF-P8 |
| GF-T8 |
| GF-MCP |
|
GFRemote
Version 1.00, Build 6 (30 Jan, 2003)
GFRemote is a handy
Windows utility for you hard-core sim enthusiasts using
multiple networked PCs in your sim
cockpit. With GFRemote, you can connect your GoFlight® cockpit
control modules to any networked computer, and then operate
MicrosoftTM Flight Simulator using those modules just as if they were
connected to the main PC.
This build is most useful for
Project Magenta customers using the MCP/FCU and Glass Cockpit
software packages. Most functions of the Project Magenta MCP,
FCU, EFIS and ND systems can be controlled using your GF-45,
GF-P8, GF-T8 and GF-MCP cockpit control modules
through GFRemote!
-->
Click
here to download
GFRemote <--
After downloading:
Unpack the ZIP file to a temporary folder on the networked computer
where you wish to run GFRemote.
The release notes file (README.TXT) contains a complete description
of the fixes and features included in this release.
NOTE -- Peter Dowson's WideFS utility is required in order to
use GFRemote. You can download WideFS from the Project Magenta
web site link in the column to the left. |
Patches
This section contains files that
temporarily solve problems discovered between "official" releases of
GoFlight® software. |
|
 |
GF-MCP / Level-D
SR2 Compatibility Patch (29 Sept, 2005)
This patch allows
GF-MCP owners to control the Level-D 767 autopilot after updating
their Level-D installation to Service Release 2. Note that you
must be using GoFlight® Cockpit Control Software v1.54 and Level-D
Simulations Service Release 2 in order for this patch to be
effective.
Please use this patch ONLY if you have installed Level-D
SR-2, and have problems controlling the Level-D autopilot with your
GF-MCP Advanced Autopilot module, after installing Level-D Service
Release 2.
Click here to download the ZIP archive
containing the patch. Follow the instructions in the included
README file to install.
|
NOTVAMs
(NOTices to Virtual AirMen)
All GoFlight® NOTVAM
documents are in PDF (Portable Document Format.)
To
view or print these documents, we recommend that you download and
install Adobe Acrobat Reader, if you haven't already. You
can download and use Acrobat Reader free of charge -- just click
on the Get Acrobat Reader graphic to the right. |
. |
|
|
 |
NOTVAM #1
GF-TQ6 Configuration in Many
Popular Flight Sims
When first shipped in October of 2003, the GoFlight® GF-TQ6 was
one of the world's first 6-axis USB game controllers. Most
simulator software (including Microsoft Flight Simulator 2004) is
not designed to set correct default behavior for a device with this
many axis inputs. This usually results in unexpected aircraft
behavior, and often, a call to tech support! This NOTVAM
explains how to avoid configuration conflicts and provides solid
tips on using your GF-TQ6 to its full potential in several popular
flight sims.
[View
online] -OR-
[Download
the PDF file]
|
|
 |
NOTVAM #2
GoFlight® hardware compatibility
with add-on aircraft for Microsoft Flight Simulator
Having trouble getting your GF-MCP to work with that new add-on
aircraft you just downloaded? In this NOTVAM, we reveal the
source of many compatibility issues between Microsoft Flight
Simulator add-on products -- and specifically with aircraft
autopilots.
Included in this NOTVAM is a complete key mapping solution for
one of today's most popular add-on airliner packages.
[View online] -OR-
[Download
the PDF file]
|
Make-your-own MagLabels
GoFlight®
MagLabels are magnetic-backed rectangular labels included with
certain GF-AC cockpit control modules (currently GF-P8, GF-T8,
GF-RP48, and GF-166.) They provide an easy method of labeling
and re-labeling the cockpit control functions that you assign to the
buttons and switches on these modules.
The "Do-it-yourself" MagLabels files in this section are
expanded
versions of the label sets that are shipped from the factory.
Some MagLabels file sets are provided in ready-to-print form.
Others
include templates that make it easy for you to create your own
labels for custom cockpits and third party add-on aircraft.
The ready-to-print graphic images can be printed to an adhesive
paper or plastic label, then applied to magnetic sheeting material.
The labels can then be cut from the sheet using sharp scissors and
placed in the modules' panel indentations..
ARTISTIC sim pilots:
If you have a talent for creating great-looking labels and would
like to share them with your fellow sim pilots, we encourage you to
submit them for posting here. We even have rewards for great
looking art! Contact us at
customerservice@goflightinc.com
.
|
|
|
MagLabels for
Lock On:Modern Air Combat ("LOMAC")
A comprehensive set
of MagLabels for use with UbiSoft's
Lock On: Modern
Air Combat flight simulator. Contains labels for
nearly every key command listed in the LOMAC documentation,
including cockpit control, systems control, and view control.
Use your GF-P8, GF-RP48, GF-T8, GF-LGT and other modules, together
with the GoFlight® Key Mapper, to fly the aircraft in LOMAC.
Download
(File size: 1.3 MB)
Designed by
GoFlight® |
|
 |
General/Commercial Aviation MagLabels
This label set includes 245
ready-to-print MagLabels. Also included are source graphics in
several different formats for easy customization.
Download
(File size: 8.5 MB)
Designed by Johan van Wijngaarden
For customization, source graphics
in Adobe Illustrator 9/10/CS and Adobe Photoshop 7/CS formats are
provided. |
Product
Documentation
All GoFlight® downloadable
documents are in PDF (Portable Document Format.)
To
view or print these documents, we recommend that you download and
install Adobe Acrobat Reader, if you haven't already. You
can download and use Acrobat Reader free of charge -- just click
on the Get Acrobat Reader graphic to the right. |
|
|
|
|
Student Pilot Package Module Manual Instructions
[View online]
-OR-
[Download
the PDF file]
|
|
|
Private Pilot Package Module Manual Instructions
[View online]
-OR-
[Download
the PDF file]
|
|
|
Commercial Pilot Package Module Manual Instructions
[View online]
-OR-
[Download
the PDF file]
|
|
|
Jet Captain Package Module Manual Instructions
[View online]
-OR-
[Download
the PDF file]
|
|
 |
GF-45 and GF-45PM Installation Instructions
[View online]
-OR-
[Download
the PDF file]
|
|
 |
GF-P8 Pushbutton Module Installation
Instructions
[View
online]
-OR-
[Download
the PDF file]
|
|
 |
GF-T8 Toggle Switch Module Installation
Instructions
[View
online]
-OR-
[Download
the PDF file]
|
|
 |
GF-LGT Landing Gear and Trim
Control Install/Ops Guide
[View
online]
-OR-
[Download
the PDF file]
|
|
 |
GF-166 Versatile Radio Panel Install/Ops
Guide
[View online]
-OR-
[Download
the PDF file]
|
|
|
GF-MCP Advanced Autopilot Install/Ops
Guide
[View
online] -OR-
[Download
the PDF file]
|
|
 |
GF-AC Full Height Module Rack Assembly
Instructions
[View
online] -OR-
[Download
the PDF file]
|
|
 |
Flight Deck Console Assembly/Ops Guide
[View
online] -OR-
[Download
the PDF file]
|
|
For Software Developers |
If you are a software developer and would like to include support for GoFlight® technology
in your own products, we want to help. We've put together the GoFlight®
Device SDK (Software
Development Kit) to give you all the information you need. The sample code and
documentation included in the kit shows you how to do things like:
- Detecting GoFlight®
device connections
- Reading data from encoder and switch controls
- Writing messages to
displays
- Controlling brightness of displays and indicators
The GoFlight®
Device SDK includes several pre-built sample programs, along with a full set of project
and source files, ready to build for use with MicrosoftTM
Visual C++ and Visual Basic. These samples enable you to get oriented quickly, then build, run and modify the
samples to your heart's content. The comprehensive, 80+ page programmer's reference
guide makes it easy to familiarize yourself with GoFlight® device programming.
The SDK is free of charge -- simply click here, fill out
the brief form, and download the SDK (version 1.40, 12 Apr, 2002).
GoFlight® is committed to frequently updating and improving this SDK which may include
support for new GoFlight® products, additional computer platforms, new examples, and making
the GoFlight® API more robust and feature-rich.
If you have feedback for us regarding this
kit, or need information that is not covered in the content, please let us know. The best
way is to contact us by e-mail at
techsupport@goflightinc.com.
|
